Connectors
BNC Crimp, Twist-On or Compression: Which Fits Your Cable
Crimp, twist-on and compression BNC connectors compared by fitting method and tool, plus a balun for Cat5e or Cat6 runs.
The three BNC connector types differ in how they are fitted. A crimp connector is squeezed on with a crimping tool, a twist-on plug screws onto the cable by hand, and a compression connector is closed with a compression tool. Check your cable first, then the tools you own. If the run is Cat5e or Cat6, you do not need a coax connector at all: use a balun.
Crimp, twist-on and compression side by side
- Crimp: needs a coax crimping tool. Our 3-piece crimp connector has a body, a centre pin and a crimp sleeve, and the crimp ensures strong mechanical retention. It is for RG59.
- Twist-on: needs no crimp tool and no soldering. Our twist-on connector screws onto the prepared cable end and is for RG59.
- Compression: closed onto the cable with a compression tool. We do not list compression connectors or a compression tool.
Start with the cable in the wall
Look at the printing on the sheath. Our connectors work with coax for analogue and HD-over-coax cameras, so check which cable types a connector names before you buy. Strip the cable cleanly first: the HLT-323 coaxial cable stripper handles RG59 and RG6 and has adjustable blades that remove the jacket and insulation without cutting the shield or centre conductor.
About compression
Platinum Tools make SealSmart BNC compression connectors for RG59, RG6 and RG6 Quad Shield cable (Platinum Tools SealSmart instruction sheet). If your cable is quad-shield RG6 or you want compression, ask us before ordering.
Cat5e or Cat6 cable: use a balun
None of the coax connectors above fit twisted pair. If your cameras are wired in Cat5e or Cat6, a passive video balun carries the signal. The 8MP 4K passive balun with a screw terminal has a BNC male end for the camera or recorder and is normally fitted in pairs. See every plug and adapter in Connectors.
Which to choose
- RG59 and a crimp tool to hand: the 3-piece crimp connector.
- RG59 and no crimp tool: the twist-on connector.
- Compression, or quad-shield RG6: ask us first.
- Cat5e or Cat6: a balun, not a coax plug.
Parts named here
- Part number BNC-MALE-PLUG-3PCSBNC Male Crimp Plug, 3 Piece Body, Pin and Sleeve, for RG59 CCTV Coaxial Cable
- Part number BNC-TWIST-SCREW-ON-PLUG-MALETwist-On BNC Male Plug for RG59 Coax, Fit by Hand with No Crimp Tool or Soldering
- Part number coaxial-cable-stripper-HLT-323HLT-323 Coaxial Cable Stripper for RG59, RG6, RG7 and RG11, Adjustable Blade Depth
- Part number BALUN-SCREW-BLACK-8MP-PROPassive 8MP (4K) CCTV Balun, Screw Terminal Block to BNC Male, Cat5e or Cat6 Adapter
Frequently asked questions
Can I use an RG59 BNC connector on RG6 cable?
Check the connector names RG6 before you buy. Our 3-piece crimp and twist-on plugs are for RG59. Ask us if you are unsure which fits your cable.
Do I need a tool for twist-on BNC connectors?
No crimping tool or soldering is needed for our twist-on plug. You still need to strip the cable, and a coax stripper makes that cleaner.
Do you sell compression BNC connectors?
We do not list them at present. Ask us before ordering if you need compression for quad-shield RG6.
What do I use on Cat5e or Cat6 instead of coax?
A passive video balun, normally fitted in pairs, with a BNC end for the camera or recorder.
Sources & references
Part types on this subject
- BNC
- coax
- connectors
Written by
CCTV Gear team



