Buying guides
Cat6 or Cat6a for CCTV: Choosing Cable for PoE Cameras
Plain solid copper Cat6 is enough for most PoE camera runs. Choose Cat6a for shielding, 10 Gigabit headroom or tougher routes.

For most PoE camera runs up to 100 m, plain solid copper Cat6 is enough. Choose Cat6a when you want shielded cable, 10 Gigabit headroom over the full length, or a duct or outdoor route where the extra screening earns its keep. Whichever you pick, buy solid copper rather than copper-clad aluminium (CCA), and use an outdoor-rated jacket for anything that leaves the building. The sections below show what actually changes between the two.
What Cat6 and Cat6a change in practice
Cat6 carries Gigabit and PoE (the solid copper Cat6 U/UTP reel we sell is rated to IEEE 802.3bt Type 4), and an ordinary camera needs nothing like 10 Gigabit. The difference is the headroom. That reel is rated for 1GBase-T to 100 m and 10GBase-T only to 55 m. Cat6a is built for Gigabit and 10 Gigabit Ethernet, so it is the cable to pull if the run will ever carry more than a camera stream, such as a link between two switches.
Shielded or unshielded?
Unshielded twisted pair (U/UTP) is fine for most camera runs. Shielding helps where cables are bundled tightly or pass electrically noisy equipment. Our Connectix TruLAN Cat6A F/FTP cable has each pair in foil plus an overall foil screen and a polyethylene outer sheath for duct and external runs. The TruHD Cat6A U/FTP cable foil-shields each pair and has a low smoke, halogen-free jacket for indoor commercial buildings. Shielded cable needs shielded connectors, so factor those in.
Thickness and fitting connectors
The outdoor Cat6 U/UTP cable on our 23AWG solid copper reel is roughly 6.0 to 6.5 mm across and is described as fitting standard 20 mm conduit. Check the cable's diameter against the plug: the Klein Tools VDV826-764 shielded pass-through plugs are made for Cat6a and larger-diameter shielded Cat6, while the Cat6 8P8C modular plug suits ordinary Cat6.
Copper or CCA
Copper-clad aluminium is an economical choice with cost savings versus pure copper, and some of our Cat6 patch leads use it. Our 10 m white lead uses CCA and is not recommended for PoE++ or 10GBase-T backbone use. For a permanent camera run, choose solid copper, as on the Connectix Cat6 U/UTP outdoor cable, which is described as suited to PoE devices such as IP cameras.
Indoor and outdoor jackets
A polyethylene (PE) outer sheath resists moisture and the weather, so it is the one to choose outside, in ducting or on an external wall. Our grey 305 m Cat6A reel has a solid core and a jacket meant for indoor wiring, so keep it inside the building. Solid core cable is meant for fixed installations such as wall sockets, patch panels and network cabinets.
Length: where it stops mattering
The Cat6 reel above is rated for Gigabit to 100 m. A longer run needs a different answer, such as a PoE extender, which extends a run 100 m beyond the standard Ethernet cable limit. For a typical camera run, Cat6 already does the job.
Our recommendation by situation
- Typical house or small office run, indoors or outdoors: solid copper Cat6, with an outdoor sheath where needed.
- Cabling you will not want to touch again, or a link between switches: Cat6a.
- Noisy or crowded routes: shielded Cat6a with shielded connectors.
Browse every option in our Cat6 and Cat6A cable categories, and see Connectors for plugs and jacks. If you are unsure which cable suits your route, ask us before ordering.
Parts named here
- Part number TruLAN-CAT6A-F/FTP-4-PAIR-23AWG-DUCT-GRade-PE-1MConnectix TruLAN C6GFFHD-F00 Cat6A F/FTP Outdoor Network Cable, 4-Pair 23AWG PE Sheath
- Part number TruHD-RJ45-CAT6A-U/FTP-LSFH-1M-WhiteTruHD Cat6A RJ45 U/FTP LSFH Network Cable, White, Pre-Terminated Patch Lead
- Part number RJ45-CAT6-1M-REEL-BLACK-23AWGRJ45 CAT6 U/UTP Outdoor Ethernet Cable, 1m Black Reel, 23AWG Solid Copper Core
- Part number RJ45-CAT6A-PASSTHRU-KLEIN-TOOLS-VDV826764Klein Tools VDV826-764 CAT6A Shielded Pass Through RJ45 Plug, Gold-Plated Pins, 200 Pack
Frequently asked questions
Is Cat6a overkill for an IP camera?
For a single camera, usually yes. Gigabit and PoE work on Cat6. Cat6a suits links that may carry more, such as between switches.
Can I use copper-clad aluminium cable for PoE cameras?
We advise solid copper for permanent runs. Our CCA patch lead is not recommended for PoE++ or 10GBase-T backbone use.
Do I need shielded cable for CCTV?
Not normally. Shielding helps in crowded or noisy routes, and it needs shielded connectors.
Part types on this subject
- Cat6
- Cat6a
- PoE cable
- network cable
- IP cameras
Written by
CCTV Gear team



