Camera Bracket and Junction Box
CCTV Bracket: Wall, Pole or Corner Mount for Cameras
Wall bracket for a flat wall, pole mount for a post, corner mount for two walls. Check the camera base, weight and cable path first.
Fit a wall bracket when the camera goes on a flat wall, a pole mount when the only fixing is a post or column, and a corner mount when the camera must see along two walls. Whichever you pick, check three things first: the camera's own base, the weight it must carry and the way the cable will leave the bracket. A bracket that suits the place but not the camera base will not sit right.
Wall bracket: the usual choice
A wall bracket holds the camera away from the wall so it has a clear view past the eaves and brickwork. The CCTV L shape camera mount bracket has a 200 mm extension arm and a plate with pre-drilled holes for solid walls such as brick or concrete. It is made for bullet and housing cameras. For Hikvision dome cameras the DS-1273ZJ-140 wall mount bracket is made of aluminium alloy and routes the cable through the inside of the bracket, so no wiring is left on show. PTZ speed domes need their own bracket: the Hikvision DS-1602ZJ is a pendant wall mount for them, about 97 x 182 x 306 mm and around 0.9 to 1.05 kg.
Pole mount: when there is no wall
For a lighting column, a street pole or any post, you need a bracket that wraps round it. The Hikvision DS-1604ZJ-POLE-P pole mount is an aluminium alloy adapter with adjustable stainless steel straps that go round a pole or cylindrical column. It is used together with a Hikvision PTZ wall bracket: the pole mount takes the place of the wall, and the wall bracket still holds the camera. The Hikvision DS-1619ZJ-HP is a gooseneck (swan-neck) bracket with a 20 kg load capacity.
Corner mount: two walls, one camera
On the corner of a building, a flat bracket leaves one side of the building out of view. The universal corner mount bracket is a heavy duty metal plate with several fixing slots and cable openings, so it takes a range of camera brackets and bases. It fits brick, concrete or other structural walls with suitable fixings, and suits entrances, exterior walls and car parks, where a camera on the corner covers both faces.
Where a junction box comes in
If the cable connections must be concealed and protected on a solid surface with little room for cable routing, a junction box can act as the base. The Hikvision DS-1280ZJ-DM21 is an aluminium junction box for compatible Hikvision dome cameras, with cable entry at the bottom and the side. Choose it by the camera's base pattern, as you would for any bracket.
What to check before you buy
- The camera's base. Read the camera's datasheet for the bracket it names. Hikvision dome and PTZ cameras each have their own brackets.
- Weight. Compare the camera's weight with the bracket's load rating where one is given, such as the 20 kg of the gooseneck mount.
- Cable path. Decide whether the cable runs through the bracket, through the wall or out of a junction box before you drill.
- The wall. Brick and concrete take the plate directly with the right plugs. Ask us before ordering if the wall is timber, render or cladding.
All of these are in the camera bracket and junction box category. If you are unsure which suits your camera, ask us with the camera model and we will tell you which bracket matches its base.
Parts named here
- Part number BRK-L-SHAPE-200mmCCTV L Shape Wall Bracket, 200mm Arm, Metal Camera Mount for Housings
- Part number DS-1273ZJ-140Hikvision DS-1273ZJ-140 Dome Camera Wall Mount Bracket, Aluminium, White
- Part number DS-1604ZJ-POLE-PHikvision DS-1604ZJ-POLE-P Pole Mount Adapter for PTZ Camera Wall Brackets
- Part number BRK-MOUNT-CORNER-235x210x110Universal Corner Mount Camera Bracket 235x210x110, Heavy Duty Metal for Building Corners
Frequently asked questions
Can I put a CCTV camera on a pole?
Yes. A pole mount such as the Hikvision DS-1604ZJ-POLE-P uses stainless steel straps to hold a PTZ camera bracket on a pole or column.
Is a corner mount better than a wall bracket?
Only on a building corner, where it lets one camera cover two walls. On a flat wall a standard wall bracket is the simpler choice.
Part types on this subject
- brackets
- mounting
Written by
CCTV Gear team



