Skip to content

Save 10% on any order with code · Free delivery over £75

10% off with

Hours
Mon–Fri 09:00–17:00Sat 09:00–14:00

Guides

PoE or PoE+ for IP Cameras: Which Do You Need?

802.3af and 802.3at (PoE+) are two power levels per port. Read the standard on each camera's datasheet and match it to the switch port.

802.3af and 802.3at (PoE+) are two power levels per port. Some cameras are listed for 802.3af and some for 802.3at, so read the datasheet for the exact model. Then match that standard to the port on the switch or recorder.

What af and at mean on a label

802.3af is the original PoE standard and 802.3at, also called PoE+, is the later one that supplies more power per port. A switch or recorder that lists both can run both kinds of camera. Our Hikvision DS-3E0505P-E 4-port switch is listed as supporting IEEE 802.3af and 802.3at, with up to 30 W per PoE port. A port rated 802.3af only would not suit a camera that needs 802.3at, so read the switch label as well as the camera.

Read the camera, not the camera type

You cannot tell the standard from the look of a camera. On our current range, the Hikvision DS-2CD2387G2H-LISU/SL 8MP hybrid light turret is powered by PoE IEEE 802.3af or 12 V DC, while the DS-2CD2387G3-LIS2UY/SL, an 8MP hybrid light turret with two-way audio and strobe, is listed for PoE IEEE 802.3at or 12 V DC. The DS-2CD2347G2-LSU/SL strobe turret, the DS-2CD2T47G2H-LISU/SL bullet and the DS-2CD3356G2-ISU IR turret are all listed for 802.3af. Two similar cameras can therefore need different ports. Always open the datasheet for the exact model number.

Domes and PTZ cameras

Domes and PTZ cameras follow the same rule: read the datasheet. The Hikvision DS-2DE4A425IW-DE 4MP 25× PTZ camera lists PoE+ and 12 V DC power support, so it needs a PoE+ (802.3at) port or a 12 V supply. The LWA28PW-C3 5MP AI dome is powered through a single PoE cable, but its listing gives no af or at standard, so ask us before ordering if you are matching it to a port.

Finding the watts

The standard tells you which kind of port the camera accepts. The watt figure tells you how much power it uses. A datasheet may give several: the PoE draw, the draw on a 12 V adapter and extras such as audio. Use the PoE figure. For example, the Hikvision DS-2CD2347G3-LIS2UY/SL 4MP turret is listed as PoE IEEE 802.3at, Class 4, maximum 17 W, and a separate 12 V DC maximum of 15.5 W. Take the 17 W, because that is what the port has to supply. If a datasheet gives no watt figure, ask us before ordering and we will help you size the switch.

Shared total budget

Every switch also has a total PoE budget shared by all its ports, which can be lower than the ports added together. Our guide to the PoE switch for CCTV covers how to add it up.

Quick check before you order

  • Camera datasheet: the PoE standard (af or at) and the maximum PoE watts.
  • Switch or recorder: the ports list 802.3af and 802.3at, so af and at cameras both run.
  • Our PoE calculator does the adding up for you.

Browse every model in our PoE switches category, or go straight to 8-port PoE switches. If you are not sure whether a camera and a port match, ask us before ordering.

Parts named here

Frequently asked questions

Is PoE+ the same as 802.3at?

Yes. PoE+ is the common name for IEEE 802.3at, the standard that supplies more power per port than 802.3af.

Will an 802.3af camera work on a PoE+ port?

A switch that lists both 802.3af and 802.3at, such as our Hikvision PoE switches, supports cameras of either standard.

Do PoE+ cameras need a PoE+ port?

A camera listed for 802.3at needs a port that supports 802.3at. An 802.3af-only port may not power it, so check both labels.

Part types on this subject

  • PoE
  • IP cameras
  • PoE switches

Written by

CCTV Gear team