Full HD 1080P HDMI Extender Set, 30m (100ft) via Cat5e/Cat6 RJ45, Transmitter and Receiver

If the recorder sits in one room and the monitor needs to be in another, a long HDMI lead is a poor answer: it picks up faults over distance and is awkward to route. This extender kit instead carries the picture over a single Cat5e or Cat6 cable, up to 30 metres (100ft).

How it connects

The transmitter takes the HDMI output of your DVR or NVR. The receiver connects to the monitor or TV. A single network cable runs from one to the other. Nothing needs installing: no driver, no software, and no network switch. The video is Full HD 1080p at 60Hz and audio is carried too. Both units need their own 5V power, and the box has two adapters for this. EDID copy is built in so the source device can read the screen at the far end.

In the box

• 1 x transmitter.
• 1 x receiver.
• 2 x 5V power adapters.
• 1 x user manual.

Limits worth knowing

• Maximum picture is 1080p. It will not pass 4K.
• There is no IR pass-through, so a remote control will not work through the link.
• Use one cable directly between the two units. Do not route it via a switch or router.
• Pure copper Cat6 gives the best result.

If you need 4K or a keyboard and mouse at the monitor end, look at the 4K KVM extender in our range.