PCT-212 2-Way Grey Lever Wire Connector Terminal Block, Tool-Free for CCTV Power

This is a 2-way lever wire connector. Lift the lever, insert the stripped conductor, press the lever down, and the wire is clamped. It joins two wires, so it is the simplest way to extend a power cable or repair a break in a run.

It is intended for 12V DC and 24V DC CCTV power systems, and also for alarm wiring and low-voltage control wiring. It takes solid and stranded copper conductors of the kind used in CCTV power cable.

The connector is reusable. If you need to move a camera or change a wiring layout, lift the levers and take the wires out again without damaging them. That is the difference from a crimp, which you cut off and replace.

The housing is small and insulated, so it fits in a junction box or a camera back box. It is a good choice for long camera runs that you need to join in the middle.

For a single supply that feeds several cameras, use a splicing connector with more ports instead, such as the SPL series in our connectors category. Check the connector's conductor range against your cable before you start.